diff options
Diffstat (limited to 'peripheral/libmraa/src/x86/up.c')
| -rw-r--r-- | peripheral/libmraa/src/x86/up.c | 25 |
1 files changed, 13 insertions, 12 deletions
diff --git a/peripheral/libmraa/src/x86/up.c b/peripheral/libmraa/src/x86/up.c index 556c1c3..24b269d 100644 --- a/peripheral/libmraa/src/x86/up.c +++ b/peripheral/libmraa/src/x86/up.c @@ -1,3 +1,4 @@ + /* * Author: Dan O'Donovan <dan@emutex.com> * Copyright (c) 2015 Emutex Ltd. @@ -163,14 +164,14 @@ mraa_up_board() // Configure i2c adaptor #0 (default) // (For consistency with Raspberry Pi 2, use I2C1 as our primary I2C bus) b->i2c_bus[0].bus_id = 1; - get_pin_index(b, "I2C1_SDA", (int*) &(b->i2c_bus[0].sda)); - get_pin_index(b, "I2C1_SCL", (int*) &(b->i2c_bus[0].scl)); + get_pin_index(b, "I2C1_SDA", &(b->i2c_bus[0].sda)); + get_pin_index(b, "I2C1_SCL", &(b->i2c_bus[0].scl)); // Configure i2c adaptor #1 // (normally reserved for accessing HAT EEPROM) b->i2c_bus[1].bus_id = 0; - get_pin_index(b, "I2C0_SDA", (int*) &(b->i2c_bus[1].sda)); - get_pin_index(b, "I2C0_SCL", (int*) &(b->i2c_bus[1].scl)); + get_pin_index(b, "I2C0_SDA", &(b->i2c_bus[1].sda)); + get_pin_index(b, "I2C0_SCL", &(b->i2c_bus[1].scl)); b->def_i2c_bus = 0; // Configure PWM @@ -182,18 +183,18 @@ mraa_up_board() b->spi_bus_count = 2; b->spi_bus[0].bus_id = 2; b->spi_bus[0].slave_s = 0; - get_pin_index(b, "SPI_CS0", (int*) &(b->spi_bus[0].cs)); - get_pin_index(b, "SPI_MOSI", (int*) &(b->spi_bus[0].mosi)); - get_pin_index(b, "SPI_MISO", (int*) &(b->spi_bus[0].miso)); - get_pin_index(b, "SPI_CLK", (int*) &(b->spi_bus[0].sclk)); + get_pin_index(b, "SPI_CS0", &(b->spi_bus[0].cs)); + get_pin_index(b, "SPI_MOSI", &(b->spi_bus[0].mosi)); + get_pin_index(b, "SPI_MISO", &(b->spi_bus[0].miso)); + get_pin_index(b, "SPI_CLK", &(b->spi_bus[0].sclk)); b->def_spi_bus = 0; // Configure SPI #0 CS1 b->spi_bus[1].bus_id = 2; b->spi_bus[1].slave_s = 1; - get_pin_index(b, "SPI_CS1", (int*) &(b->spi_bus[1].cs)); - get_pin_index(b, "SPI_MOSI", (int*) &(b->spi_bus[1].mosi)); - get_pin_index(b, "SPI_MISO", (int*) &(b->spi_bus[1].miso)); - get_pin_index(b, "SPI_CLK", (int*) &(b->spi_bus[1].sclk)); + get_pin_index(b, "SPI_CS1", &(b->spi_bus[1].cs)); + get_pin_index(b, "SPI_MOSI", &(b->spi_bus[1].mosi)); + get_pin_index(b, "SPI_MISO", &(b->spi_bus[1].miso)); + get_pin_index(b, "SPI_CLK", &(b->spi_bus[1].sclk)); // Configure UART #1 (default) b->uart_dev_count = 2; |