diff options
Diffstat (limited to 'drivers/st/usb/stm32mp1_usb.c')
| -rw-r--r-- | drivers/st/usb/stm32mp1_usb.c | 1091 |
1 files changed, 1091 insertions, 0 deletions
diff --git a/drivers/st/usb/stm32mp1_usb.c b/drivers/st/usb/stm32mp1_usb.c new file mode 100644 index 000000000..9a4969036 --- /dev/null +++ b/drivers/st/usb/stm32mp1_usb.c @@ -0,0 +1,1091 @@ +/* + * Copyright (c) 2021, STMicroelectronics - All Rights Reserved + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include <stdint.h> + +#include <arch_helpers.h> +#include <common/debug.h> +#include <drivers/delay_timer.h> +#include <drivers/st/stm32mp1_usb.h> +#include <lib/mmio.h> + +#include <platform_def.h> + +#define USB_OTG_MODE_DEVICE 0U +#define USB_OTG_MODE_HOST 1U +#define USB_OTG_MODE_DRD 2U + +#define EP_TYPE_CTRL 0U +#define EP_TYPE_ISOC 1U +#define EP_TYPE_BULK 2U +#define EP_TYPE_INTR 3U + +#define USBD_FIFO_FLUSH_TIMEOUT_US 1000U +#define EP0_FIFO_SIZE 64U + +/* OTG registers offsets */ +#define OTG_GOTGINT 0x004U +#define OTG_GAHBCFG 0x008U +#define OTG_GUSBCFG 0x00CU +#define OTG_GRSTCTL 0x010U +#define OTG_GINTSTS 0x014U +#define OTG_GINTMSK 0x018U +#define OTG_GRXSTSP 0x020U +#define OTG_GLPMCFG 0x054U +#define OTG_DCFG 0x800U +#define OTG_DCTL 0x804U +#define OTG_DSTS 0x808U +#define OTG_DIEPMSK 0x810U +#define OTG_DOEPMSK 0x814U +#define OTG_DAINT 0x818U +#define OTG_DAINTMSK 0x81CU +#define OTG_DIEPEMPMSK 0x834U + +/* Definitions for OTG_DIEPx registers */ +#define OTG_DIEP_BASE 0x900U +#define OTG_DIEP_SIZE 0x20U +#define OTG_DIEPCTL 0x00U +#define OTG_DIEPINT 0x08U +#define OTG_DIEPTSIZ 0x10U +#define OTG_DIEPDMA 0x14U +#define OTG_DTXFSTS 0x18U +#define OTG_DIEP_MAX_NB 9U + +/* Definitions for OTG_DOEPx registers */ +#define OTG_DOEP_BASE 0xB00U +#define OTG_DOEP_SIZE 0x20U +#define OTG_DOEPCTL 0x00U +#define OTG_DOEPINT 0x08U +#define OTG_DOEPTSIZ 0x10U +#define OTG_DOEPDMA 0x14U +#define OTG_D0EP_MAX_NB 9U + +/* Definitions for OTG_DAINT registers */ +#define OTG_DAINT_OUT_MASK GENMASK(31, 16) +#define OTG_DAINT_OUT_SHIFT 16U +#define OTG_DAINT_IN_MASK GENMASK(15, 0) +#define OTG_DAINT_IN_SHIFT 0U + +#define OTG_DAINT_EP0_IN BIT(16) +#define OTG_DAINT_EP0_OUT BIT(0) + +/* Definitions for FIFOs */ +#define OTG_FIFO_BASE 0x1000U +#define OTG_FIFO_SIZE 0x1000U + +/* Bit definitions for OTG_GOTGINT register */ +#define OTG_GOTGINT_SEDET BIT(2) + +/* Bit definitions for OTG_GAHBCFG register */ +#define OTG_GAHBCFG_GINT BIT(0) + +/* Bit definitions for OTG_GUSBCFG register */ +#define OTG_GUSBCFG_TRDT GENMASK(13, 10) +#define OTG_GUSBCFG_TRDT_SHIFT 10U + +#define USBD_HS_TRDT_VALUE 9U + +/* Bit definitions for OTG_GRSTCTL register */ +#define OTG_GRSTCTL_RXFFLSH BIT(4) +#define OTG_GRSTCTL_TXFFLSH BIT(5) +#define OTG_GRSTCTL_TXFNUM_SHIFT 6U + +/* Bit definitions for OTG_GINTSTS register */ +#define OTG_GINTSTS_CMOD BIT(0) +#define OTG_GINTSTS_MMIS BIT(1) +#define OTG_GINTSTS_OTGINT BIT(2) +#define OTG_GINTSTS_SOF BIT(3) +#define OTG_GINTSTS_RXFLVL BIT(4) +#define OTG_GINTSTS_USBSUSP BIT(11) +#define OTG_GINTSTS_USBRST BIT(12) +#define OTG_GINTSTS_ENUMDNE BIT(13) +#define OTG_GINTSTS_IEPINT BIT(18) +#define OTG_GINTSTS_OEPINT BIT(19) +#define OTG_GINTSTS_IISOIXFR BIT(20) +#define OTG_GINTSTS_IPXFR_INCOMPISOOUT BIT(21) +#define OTG_GINTSTS_LPMINT BIT(27) +#define OTG_GINTSTS_SRQINT BIT(30) +#define OTG_GINTSTS_WKUPINT BIT(31) + +/* Bit definitions for OTG_GRXSTSP register */ +#define OTG_GRXSTSP_EPNUM GENMASK(3, 0) +#define OTG_GRXSTSP_BCNT GENMASK(14, 4) +#define OTG_GRXSTSP_BCNT_SHIFT 4U +#define OTG_GRXSTSP_PKTSTS GENMASK(20, 17) +#define OTG_GRXSTSP_PKTSTS_SHIFT 17U + +#define STS_GOUT_NAK 1U +#define STS_DATA_UPDT 2U +#define STS_XFER_COMP 3U +#define STS_SETUP_COMP 4U +#define STS_SETUP_UPDT 6U + +/* Bit definitions for OTG_GLPMCFG register */ +#define OTG_GLPMCFG_BESL GENMASK(5, 2) + +/* Bit definitions for OTG_DCFG register */ +#define OTG_DCFG_DAD GENMASK(10, 4) +#define OTG_DCFG_DAD_SHIFT 4U + +/* Bit definitions for OTG_DCTL register */ +#define OTG_DCTL_RWUSIG BIT(0) +#define OTG_DCTL_SDIS BIT(1) +#define OTG_DCTL_CGINAK BIT(8) + +/* Bit definitions for OTG_DSTS register */ +#define OTG_DSTS_SUSPSTS BIT(0) +#define OTG_DSTS_ENUMSPD_MASK GENMASK(2, 1) +#define OTG_DSTS_FNSOF0 BIT(8) + +#define OTG_DSTS_ENUMSPD(val) ((val) << 1) +#define OTG_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ OTG_DSTS_ENUMSPD(0U) +#define OTG_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ OTG_DSTS_ENUMSPD(1U) +#define OTG_DSTS_ENUMSPD_LS_PHY_6MHZ OTG_DSTS_ENUMSPD(2U) +#define OTG_DSTS_ENUMSPD_FS_PHY_48MHZ OTG_DSTS_ENUMSPD(3U) + +/* Bit definitions for OTG_DIEPMSK register */ +#define OTG_DIEPMSK_XFRCM BIT(0) +#define OTG_DIEPMSK_EPDM BIT(1) +#define OTG_DIEPMSK_TOM BIT(3) + +/* Bit definitions for OTG_DOEPMSK register */ +#define OTG_DOEPMSK_XFRCM BIT(0) +#define OTG_DOEPMSK_EPDM BIT(1) +#define OTG_DOEPMSK_STUPM BIT(3) + +/* Bit definitions for OTG_DIEPCTLx registers */ +#define OTG_DIEPCTL_MPSIZ GENMASK(10, 0) +#define OTG_DIEPCTL_STALL BIT(21) +#define OTG_DIEPCTL_CNAK BIT(26) +#define OTG_DIEPCTL_SD0PID_SEVNFRM BIT(28) +#define OTG_DIEPCTL_SODDFRM BIT(29) +#define OTG_DIEPCTL_EPDIS BIT(30) +#define OTG_DIEPCTL_EPENA BIT(31) + +/* Bit definitions for OTG_DIEPINTx registers */ +#define OTG_DIEPINT_XFRC BIT(0) +#define OTG_DIEPINT_EPDISD BIT(1) +#define OTG_DIEPINT_TOC BIT(3) +#define OTG_DIEPINT_ITTXFE BIT(4) +#define OTG_DIEPINT_INEPNE BIT(6) +#define OTG_DIEPINT_TXFE BIT(7) +#define OTG_DIEPINT_TXFE_SHIFT 7U + +#define OTG_DIEPINT_MASK (BIT(13) | BIT(11) | GENMASK(9, 0)) + +/* Bit definitions for OTG_DIEPTSIZx registers */ +#define OTG_DIEPTSIZ_XFRSIZ GENMASK(18, 0) +#define OTG_DIEPTSIZ_PKTCNT GENMASK(28, 19) +#define OTG_DIEPTSIZ_PKTCNT_SHIFT 19U +#define OTG_DIEPTSIZ_MCNT_MASK GENMASK(30, 29) +#define OTG_DIEPTSIZ_MCNT_DATA0 BIT(29) + +#define OTG_DIEPTSIZ_PKTCNT_1 BIT(19) + +/* Bit definitions for OTG_DTXFSTSx registers */ +#define OTG_DTXFSTS_INEPTFSAV GENMASK(15, 0) + +/* Bit definitions for OTG_DOEPCTLx registers */ +#define OTG_DOEPCTL_STALL BIT(21) +#define OTG_DOEPCTL_CNAK BIT(26) +#define OTG_DOEPCTL_SD0PID_SEVNFRM BIT(28) /* other than endpoint 0 */ +#define OTG_DOEPCTL_SD1PID_SODDFRM BIT(29) /* other than endpoint 0 */ +#define OTG_DOEPCTL_EPDIS BIT(30) +#define OTG_DOEPCTL_EPENA BIT(31) + +/* Bit definitions for OTG_DOEPTSIZx registers */ +#define OTG_DOEPTSIZ_XFRSIZ GENMASK(18, 0) +#define OTG_DOEPTSIZ_PKTCNT GENMASK(28, 19) +#define OTG_DOEPTSIZ_RXDPID_STUPCNT GENMASK(30, 29) + +/* Bit definitions for OTG_DOEPINTx registers */ +#define OTG_DOEPINT_XFRC BIT(0) +#define OTG_DOEPINT_STUP BIT(3) +#define OTG_DOEPINT_OTEPDIS BIT(4) + +#define OTG_DOEPINT_MASK (GENMASK(15, 12) | GENMASK(9, 8) | GENMASK(6, 0)) + +#define EP_NB 15U +#define EP_ALL 0x10U + +/* + * Flush TX FIFO. + * handle: PCD handle. + * num: FIFO number. + * This parameter can be a value from 1 to 15 or EP_ALL. + * EP_ALL= 0x10 means Flush all TX FIFOs + * return: USB status. + */ +static enum usb_status usb_dwc2_flush_tx_fifo(void *handle, uint32_t num) +{ + uintptr_t usb_base_addr = (uintptr_t)handle; + uint64_t timeout = timeout_init_us(USBD_FIFO_FLUSH_TIMEOUT_US); + + mmio_write_32(usb_base_addr + OTG_GRSTCTL, + OTG_GRSTCTL_TXFFLSH | (uint32_t)(num << OTG_GRSTCTL_TXFNUM_SHIFT)); + + while ((mmio_read_32(usb_base_addr + OTG_GRSTCTL) & + OTG_GRSTCTL_TXFFLSH) == OTG_GRSTCTL_TXFFLSH) { + if (timeout_elapsed(timeout)) { + return USBD_TIMEOUT; + } + } + + return USBD_OK; +} + +/* + * Flush RX FIFO. + * handle: PCD handle. + * return: USB status. + */ +static enum usb_status usb_dwc2_flush_rx_fifo(void *handle) +{ + uintptr_t usb_base_addr = (uintptr_t)handle; + uint64_t timeout = timeout_init_us(USBD_FIFO_FLUSH_TIMEOUT_US); + + mmio_write_32(usb_base_addr + OTG_GRSTCTL, OTG_GRSTCTL_RXFFLSH); + + while ((mmio_read_32(usb_base_addr + OTG_GRSTCTL) & + OTG_GRSTCTL_RXFFLSH) == OTG_GRSTCTL_RXFFLSH) { + if (timeout_elapsed(timeout)) { + return USBD_TIMEOUT; + } + } + + return USBD_OK; +} + +/* + * Return the global USB interrupt status. + * handle: PCD handle. + * return: Interrupt register value. + */ +static uint32_t usb_dwc2_read_int(void *handle) +{ + uintptr_t usb_base_addr = (uintptr_t)handle; + + return mmio_read_32(usb_base_addr + OTG_GINTSTS) & + mmio_read_32(usb_base_addr + OTG_GINTMSK); +} + +/* + * Return the USB device OUT endpoints interrupt. + * handle: PCD handle. + * return: Device OUT endpoint interrupts. + */ +static uint32_t usb_dwc2_all_out_ep_int(void *handle) +{ + uintptr_t usb_base_addr = (uintptr_t)handle; + + return ((mmio_read_32(usb_base_addr + OTG_DAINT) & + mmio_read_32(usb_base_addr + OTG_DAINTMSK)) & + OTG_DAINT_OUT_MASK) >> OTG_DAINT_OUT_SHIFT; +} + +/* + * Return the USB device IN endpoints interrupt. + * handle: PCD handle. + * return: Device IN endpoint interrupts. + */ +static uint32_t usb_dwc2_all_in_ep_int(void *handle) +{ + uintptr_t usb_base_addr = (uintptr_t)handle; + + return ((mmio_read_32(usb_base_addr + OTG_DAINT) & + mmio_read_32(usb_base_addr + OTG_DAINTMSK)) & + OTG_DAINT_IN_MASK) >> OTG_DAINT_IN_SHIFT; +} + +/* + * Return Device OUT EP interrupt register. + * handle: PCD handle. + * epnum: Endpoint number. + * This parameter can be a value from 0 to 15. + * return: Device OUT EP Interrupt register. + */ +static uint32_t usb_dwc2_out_ep_int(void *handle, uint8_t epnum) +{ + uintptr_t usb_base_addr = (uintptr_t)handle; + + return mmio_read_32(usb_base_addr + OTG_DOEP_BASE + + (epnum * OTG_DOEP_SIZE) + OTG_DOEPINT) & + mmio_read_32(usb_base_addr + OTG_DOEPMSK); +} + +/* + * Return Device IN EP interrupt register. + * handle: PCD handle. + * epnum: Endpoint number. + * This parameter can be a value from 0 to 15. + * return: Device IN EP Interrupt register. + */ +static uint32_t usb_dwc2_in_ep_int(void *handle, uint8_t epnum) +{ + uintptr_t usb_base_addr = (uintptr_t)handle; + uint32_t msk; + uint32_t emp; + + msk = mmio_read_32(usb_base_addr + OTG_DIEPMSK); + emp = mmio_read_32(usb_base_addr + OTG_DIEPEMPMSK); + msk |= ((emp >> epnum) << OTG_DIEPINT_TXFE_SHIFT) & OTG_DIEPINT_TXFE; + + return mmio_read_32(usb_base_addr + OTG_DIEP_BASE + + (epnum * OTG_DIEP_SIZE) + OTG_DIEPINT) & msk; +} + +/* + * Return USB core mode. + * handle: PCD handle. + * return: Core mode. + * This parameter can be 0 (host) or 1 (device). + */ +static uint32_t usb_dwc2_get_mode(void *handle) +{ + uintptr_t usb_base_addr = (uintptr_t)handle; + + return mmio_read_32(usb_base_addr + OTG_GINTSTS) & OTG_GINTSTS_CMOD; +} + +/* + * Activate EP0 for detup transactions. + * handle: PCD handle. + * return: USB status. + */ +static enum usb_status usb_dwc2_activate_setup(void *handle) +{ + uintptr_t usb_base_addr = (uintptr_t)handle; + uintptr_t reg_offset = usb_base_addr + OTG_DIEP_BASE; + + /* Set the MPS of the IN EP based on the enumeration speed */ + mmio_clrbits_32(reg_offset + OTG_DIEPCTL, OTG_DIEPCTL_MPSIZ); + + if ((mmio_read_32(usb_base_addr + OTG_DSTS) & OTG_DSTS_ENUMSPD_MASK) == + OTG_DSTS_ENUMSPD_LS_PHY_6MHZ) { + mmio_setbits_32(reg_offset + OTG_DIEPCTL, 3U); + } + + mmio_setbits_32(usb_base_addr + OTG_DCTL, OTG_DCTL_CGINAK); + + return USBD_OK; +} + +/* + * Prepare the EP0 to start the first control setup. + * handle: Selected device. + * return: USB status. + */ +static enum usb_status usb_dwc2_ep0_out_start(void *handle) +{ + uintptr_t usb_base_addr = (uintptr_t)handle; + uintptr_t reg_offset = usb_base_addr + OTG_DIEP_BASE + OTG_DIEPTSIZ; + uint32_t reg_value = 0U; + + /* PKTCNT = 1 and XFRSIZ = 24 bytes for endpoint 0 */ + reg_value |= OTG_DIEPTSIZ_PKTCNT_1; + reg_value |= (EP0_FIFO_SIZE & OTG_DIEPTSIZ_XFRSIZ); + reg_value |= OTG_DOEPTSIZ_RXDPID_STUPCNT; + + mmio_write_32(reg_offset, reg_value); + + return USBD_OK; +} + +/* + * Write a packet into the TX FIFO associated with the EP/channel. + * handle: Selected device. + * src: Pointer to source buffer. + * ch_ep_num: Endpoint or host channel number. + * len: Number of bytes to write. + * return: USB status. + */ +static enum usb_status usb_dwc2_write_packet(void *handle, uint8_t *src, + uint8_t ch_ep_num, uint16_t len) +{ + uint32_t reg_offset; + uint32_t count32b = (len + 3U) / 4U; + uint32_t i; + + reg_offset = (uintptr_t)handle + OTG_FIFO_BASE + + (ch_ep_num * OTG_FIFO_SIZE); + + for (i = 0U; i < count32b; i++) { + uint32_t src_copy = 0U; + uint32_t j; + + /* Data written to FIFO need to be 4 bytes aligned */ + for (j = 0U; j < 4U; j++) { + src_copy += (*(src + j)) << (8U * j); + } + + mmio_write_32(reg_offset, src_copy); + src += 4U; + } + + return USBD_OK; +} + +/* + * Read a packet from the RX FIFO associated with the EP/channel. + * handle: Selected device. + * dst: Destination pointer. + * len: Number of bytes to read. + * return: Pointer to destination buffer. + */ +static void *usb_dwc2_read_packet(void *handle, uint8_t *dest, uint16_t len) +{ + uint32_t reg_offset; + uint32_t count32b = (len + 3U) / 4U; + uint32_t i; + + VERBOSE("read packet length %i to 0x%lx\n", len, (uintptr_t)dest); + + reg_offset = (uintptr_t)handle + OTG_FIFO_BASE; + + for (i = 0U; i < count32b; i++) { + *(uint32_t *)dest = mmio_read_32(reg_offset); + dest += 4U; + dsb(); + } + + return (void *)dest; +} + +/* + * Setup and start a transfer over an EP. + * handle: Selected device + * ep: Pointer to endpoint structure. + * return: USB status. + */ +static enum usb_status usb_dwc2_ep_start_xfer(void *handle, struct usbd_ep *ep) +{ + uintptr_t usb_base_addr = (uintptr_t)handle; + uint32_t reg_offset; + uint32_t reg_value; + uint32_t clear_value; + + if (ep->is_in) { + reg_offset = usb_base_addr + OTG_DIEP_BASE + (ep->num * OTG_DIEP_SIZE); + clear_value = OTG_DIEPTSIZ_PKTCNT | OTG_DIEPTSIZ_XFRSIZ; + if (ep->xfer_len == 0U) { + reg_value = OTG_DIEPTSIZ_PKTCNT_1; + } else { + /* + * Program the transfer size and packet count + * as follows: + * xfersize = N * maxpacket + short_packet + * pktcnt = N + (short_packet exist ? 1 : 0) + */ + reg_value = (OTG_DIEPTSIZ_PKTCNT & + (((ep->xfer_len + ep->maxpacket - 1U) / + ep->maxpacket) << OTG_DIEPTSIZ_PKTCNT_SHIFT)) + | ep->xfer_len; + + if (ep->type == EP_TYPE_ISOC) { + clear_value |= OTG_DIEPTSIZ_MCNT_MASK; + reg_value |= OTG_DIEPTSIZ_MCNT_DATA0; + } + } + + mmio_clrsetbits_32(reg_offset + OTG_DIEPTSIZ, clear_value, reg_value); + + if ((ep->type != EP_TYPE_ISOC) && (ep->xfer_len > 0U)) { + /* Enable the TX FIFO empty interrupt for this EP */ + mmio_setbits_32(usb_base_addr + OTG_DIEPEMPMSK, BIT(ep->num)); + } + + /* EP enable, IN data in FIFO */ + reg_value = OTG_DIEPCTL_CNAK | OTG_DIEPCTL_EPENA; + + if (ep->type == EP_TYPE_ISOC) { + if ((mmio_read_32(usb_base_addr + OTG_DSTS) & OTG_DSTS_FNSOF0) == 0U) { + reg_value |= OTG_DIEPCTL_SODDFRM; + } else { + reg_value |= OTG_DIEPCTL_SD0PID_SEVNFRM; + } + } + + mmio_setbits_32(reg_offset + OTG_DIEPCTL, reg_value); + + if (ep->type == EP_TYPE_ISOC) { + usb_dwc2_write_packet(handle, ep->xfer_buff, ep->num, ep->xfer_len); + } + } else { + reg_offset = usb_base_addr + OTG_DOEP_BASE + (ep->num * OTG_DOEP_SIZE); + /* + * Program the transfer size and packet count as follows: + * pktcnt = N + * xfersize = N * maxpacket + */ + if (ep->xfer_len == 0U) { + reg_value = ep->maxpacket | OTG_DIEPTSIZ_PKTCNT_1; + } else { + uint16_t pktcnt = (ep->xfer_len + ep->maxpacket - 1U) / ep->maxpacket; + + reg_value = (pktcnt << OTG_DIEPTSIZ_PKTCNT_SHIFT) | + (ep->maxpacket * pktcnt); + } + + mmio_clrsetbits_32(reg_offset + OTG_DOEPTSIZ, + OTG_DOEPTSIZ_XFRSIZ & OTG_DOEPTSIZ_PKTCNT, + reg_value); + + /* EP enable */ + reg_value = OTG_DOEPCTL_CNAK | OTG_DOEPCTL_EPENA; + + if (ep->type == EP_TYPE_ISOC) { + if ((mmio_read_32(usb_base_addr + OTG_DSTS) & OTG_DSTS_FNSOF0) == 0U) { + reg_value |= OTG_DOEPCTL_SD1PID_SODDFRM; + } else { + reg_value |= OTG_DOEPCTL_SD0PID_SEVNFRM; + } + } + + mmio_setbits_32(reg_offset + OTG_DOEPCTL, reg_value); + } + + return USBD_OK; +} + +/* + * Setup and start a transfer over the EP0. + * handle: Selected device. + * ep: Pointer to endpoint structure. + * return: USB status. + */ +static enum usb_status usb_dwc2_ep0_start_xfer(void *handle, struct usbd_ep *ep) +{ + uintptr_t usb_base_addr = (uintptr_t)handle; + uint32_t reg_offset; + uint32_t reg_value; + + if (ep->is_in) { + reg_offset = usb_base_addr + OTG_DIEP_BASE + + (ep->num * OTG_DIEP_SIZE); + + if (ep->xfer_len == 0U) { + reg_value = OTG_DIEPTSIZ_PKTCNT_1; + } else { + /* + * Program the transfer size and packet count + * as follows: + * xfersize = N * maxpacket + short_packet + * pktcnt = N + (short_packet exist ? 1 : 0) + */ + + if (ep->xfer_len > ep->maxpacket) { + ep->xfer_len = ep->maxpacket; + } + + reg_value = OTG_DIEPTSIZ_PKTCNT_1 | ep->xfer_len; + } + + mmio_clrsetbits_32(reg_offset + OTG_DIEPTSIZ, + OTG_DIEPTSIZ_XFRSIZ | OTG_DIEPTSIZ_PKTCNT, + reg_value); + + /* Enable the TX FIFO empty interrupt for this EP */ + if (ep->xfer_len > 0U) { + mmio_setbits_32(usb_base_addr + OTG_DIEPEMPMSK, + BIT(ep->num)); + } + + /* EP enable, IN data in FIFO */ + mmio_setbits_32(reg_offset + OTG_DIEPCTL, + OTG_DIEPCTL_CNAK | OTG_DIEPCTL_EPENA); + } else { + reg_offset = usb_base_addr + OTG_DOEP_BASE + + (ep->num * OTG_DOEP_SIZE); + + /* + * Program the transfer size and packet count as follows: + * pktcnt = N + * xfersize = N * maxpacket + */ + if (ep->xfer_len > 0U) { + ep->xfer_len = ep->maxpacket; + } + + reg_value = OTG_DIEPTSIZ_PKTCNT_1 | ep->maxpacket; + + mmio_clrsetbits_32(reg_offset + OTG_DIEPTSIZ, + OTG_DIEPTSIZ_XFRSIZ | OTG_DIEPTSIZ_PKTCNT, + reg_value); + + /* EP enable */ + mmio_setbits_32(reg_offset + OTG_DOEPCTL, + OTG_DOEPCTL_CNAK | OTG_DOEPCTL_EPENA); + } + + return USBD_OK; +} + +/* + * Set a stall condition over an EP. + * handle: Selected device. + * ep: Pointer to endpoint structure. + * return: USB status. + */ +static enum usb_status usb_dwc2_ep_set_stall(void *handle, struct usbd_ep *ep) +{ + uintptr_t usb_base_addr = (uintptr_t)handle; + uint32_t reg_offset; + uint32_t reg_value; + + if (ep->is_in) { + reg_offset = usb_base_addr + OTG_DIEP_BASE + + (ep->num * OTG_DIEP_SIZE); + reg_value = mmio_read_32(reg_offset + OTG_DIEPCTL); + + if ((reg_value & OTG_DIEPCTL_EPENA) == 0U) { + reg_value &= ~OTG_DIEPCTL_EPDIS; + } + + reg_value |= OTG_DIEPCTL_STALL; + + mmio_write_32(reg_offset + OTG_DIEPCTL, reg_value); + } else { + reg_offset = usb_base_addr + OTG_DOEP_BASE + + (ep->num * OTG_DOEP_SIZE); + reg_value = mmio_read_32(reg_offset + OTG_DOEPCTL); + + if ((reg_value & OTG_DOEPCTL_EPENA) == 0U) { + reg_value &= ~OTG_DOEPCTL_EPDIS; + } + + reg_value |= OTG_DOEPCTL_STALL; + + mmio_write_32(reg_offset + OTG_DOEPCTL, reg_value); + } + + return USBD_OK; +} + +/* + * Stop the USB device mode. + * handle: Selected device. + * return: USB status. + */ +static enum usb_status usb_dwc2_stop_device(void *handle) +{ + uintptr_t usb_base_addr = (uintptr_t)handle; + uint32_t i; + + /* Disable Int */ + mmio_clrbits_32(usb_base_addr + OTG_GAHBCFG, OTG_GAHBCFG_GINT); + + /* Clear pending interrupts */ + for (i = 0U; i < EP_NB; i++) { + mmio_write_32(usb_base_addr + OTG_DIEP_BASE + (i * OTG_DIEP_SIZE) + OTG_DIEPINT, + OTG_DIEPINT_MASK); + mmio_write_32(usb_base_addr + OTG_DOEP_BASE + (i * OTG_DOEP_SIZE) + OTG_DOEPINT, + OTG_DOEPINT_MASK); + } + + mmio_write_32(usb_base_addr + OTG_DAINT, OTG_DAINT_IN_MASK | OTG_DAINT_OUT_MASK); + + /* Clear interrupt masks */ + mmio_write_32(usb_base_addr + OTG_DIEPMSK, 0U); + mmio_write_32(usb_base_addr + OTG_DOEPMSK, 0U); + mmio_write_32(usb_base_addr + OTG_DAINTMSK, 0U); + + /* Flush the FIFO */ + usb_dwc2_flush_rx_fifo(handle); + usb_dwc2_flush_tx_fifo(handle, EP_ALL); + + /* Disconnect the USB device by disabling the pull-up/pull-down */ + mmio_setbits_32((uintptr_t)handle + OTG_DCTL, OTG_DCTL_SDIS); + + return USBD_OK; +} + +/* + * Stop the USB device mode. + * handle: Selected device. + * address: New device address to be assigned. + * This parameter can be a value from 0 to 255. + * return: USB status. + */ +static enum usb_status usb_dwc2_set_address(void *handle, uint8_t address) +{ + uintptr_t usb_base_addr = (uintptr_t)handle; + + mmio_clrsetbits_32(usb_base_addr + OTG_DCFG, + OTG_DCFG_DAD, + address << OTG_DCFG_DAD_SHIFT); + + return USBD_OK; +} + +/* + * Check FIFO for the next packet to be loaded. + * handle: Selected device. + * epnum : Endpoint number. + * xfer_len: Block length. + * xfer_count: Number of blocks. + * maxpacket: Max packet length. + * xfer_buff: Buffer pointer. + * return: USB status. + */ +static enum usb_status usb_dwc2_write_empty_tx_fifo(void *handle, + uint32_t epnum, + uint32_t xfer_len, + uint32_t *xfer_count, + uint32_t maxpacket, + uint8_t **xfer_buff) +{ + uintptr_t usb_base_addr = (uintptr_t)handle; + uint32_t reg_offset; + int32_t len; + uint32_t len32b; + enum usb_status ret; + + len = xfer_len - *xfer_count; + + if ((len > 0) && ((uint32_t)len > maxpacket)) { + len = maxpacket; + } + + len32b = (len + 3U) / 4U; + + reg_offset = usb_base_addr + OTG_DIEP_BASE + (epnum * OTG_DIEP_SIZE); + + while (((mmio_read_32(reg_offset + OTG_DTXFSTS) & + OTG_DTXFSTS_INEPTFSAV) > len32b) && + (*xfer_count < xfer_len) && (xfer_len != 0U)) { + /* Write the FIFO */ + len = xfer_len - *xfer_count; + + if ((len > 0) && ((uint32_t)len > maxpacket)) { + len = maxpacket; + } + + len32b = (len + 3U) / 4U; + + ret = usb_dwc2_write_packet(handle, *xfer_buff, epnum, len); + if (ret != USBD_OK) { + return ret; + } + + *xfer_buff += len; + *xfer_count += len; + } + + if (len <= 0) { + mmio_clrbits_32(usb_base_addr + OTG_DIEPEMPMSK, BIT(epnum)); + } + + return USBD_OK; +} + +/* + * Handle PCD interrupt request. + * handle: PCD handle. + * param: Pointer to information updated by the IT handling. + * return: Action to do after IT handling. + */ +static enum usb_action usb_dwc2_it_handler(void *handle, uint32_t *param) +{ + uintptr_t usb_base_addr = (uintptr_t)handle; + uint32_t ep_intr; + uint32_t epint; + uint32_t epnum; + uint32_t temp; + enum usb_status ret; + + if (usb_dwc2_get_mode(handle) != USB_OTG_MODE_DEVICE) { + return USB_NOTHING; + } + + /* Avoid spurious interrupt */ + if (usb_dwc2_read_int(handle) == 0U) { + return USB_NOTHING; + } + + if ((usb_dwc2_read_int(handle) & OTG_GINTSTS_MMIS) != 0U) { + /* Incorrect mode, acknowledge the interrupt */ + mmio_write_32(usb_base_addr + OTG_GINTSTS, OTG_GINTSTS_MMIS); + } + + if ((usb_dwc2_read_int(handle) & OTG_GINTSTS_OEPINT) != 0U) { + uint32_t reg_offset; + + /* Read in the device interrupt bits */ + ep_intr = usb_dwc2_all_out_ep_int(handle); + epnum = 0U; + while ((ep_intr & BIT(0)) != BIT(0)) { + epnum++; + ep_intr >>= 1; + } + + reg_offset = usb_base_addr + OTG_DOEP_BASE + (epnum * OTG_DOEP_SIZE) + OTG_DOEPINT; + + epint = usb_dwc2_out_ep_int(handle, epnum); + + if ((epint & OTG_DOEPINT_XFRC) == OTG_DOEPINT_XFRC) { + mmio_write_32(reg_offset, OTG_DOEPINT_XFRC); + *param = epnum; + + return USB_DATA_OUT; + } + + if ((epint & OTG_DOEPINT_STUP) == OTG_DOEPINT_STUP) { + /* Inform that a setup packet is available */ + mmio_write_32(reg_offset, OTG_DOEPINT_STUP); + + return USB_SETUP; + } + + if ((epint & OTG_DOEPINT_OTEPDIS) == OTG_DOEPINT_OTEPDIS) { + mmio_write_32(reg_offset, OTG_DOEPINT_OTEPDIS); + } + } + + if ((usb_dwc2_read_int(handle) & OTG_GINTSTS_IEPINT) != 0U) { + uint32_t reg_offset; + + /* Read in the device interrupt bits */ + ep_intr = usb_dwc2_all_in_ep_int(handle); + epnum = 0U; + while ((ep_intr & BIT(0)) != BIT(0)) { + epnum++; + ep_intr >>= 1; + } + + reg_offset = usb_base_addr + OTG_DIEP_BASE + (epnum * OTG_DIEP_SIZE) + OTG_DIEPINT; + + epint = usb_dwc2_in_ep_int(handle, epnum); + + if ((epint & OTG_DIEPINT_XFRC) == OTG_DIEPINT_XFRC) { + mmio_clrbits_32(usb_base_addr + OTG_DIEPEMPMSK, BIT(epnum)); + mmio_write_32(reg_offset, OTG_DIEPINT_XFRC); + *param = epnum; + + return USB_DATA_IN; + } + + if ((epint & OTG_DIEPINT_TOC) == OTG_DIEPINT_TOC) { + mmio_write_32(reg_offset, OTG_DIEPINT_TOC); + } + + if ((epint & OTG_DIEPINT_ITTXFE) == OTG_DIEPINT_ITTXFE) { + mmio_write_32(reg_offset, OTG_DIEPINT_ITTXFE); + } + + if ((epint & OTG_DIEPINT_INEPNE) == OTG_DIEPINT_INEPNE) { + mmio_write_32(reg_offset, OTG_DIEPINT_INEPNE); + } + + if ((epint & OTG_DIEPINT_EPDISD) == OTG_DIEPINT_EPDISD) { + mmio_write_32(reg_offset, OTG_DIEPINT_EPDISD); + } + + if ((epint & OTG_DIEPINT_TXFE) == OTG_DIEPINT_TXFE) { + *param = epnum; + + return USB_WRITE_EMPTY; + } + } + + /* Handle resume interrupt */ + if ((usb_dwc2_read_int(handle) & OTG_GINTSTS_WKUPINT) != 0U) { + INFO("handle USB : Resume\n"); + + /* Clear the remote wake-up signaling */ + mmio_clrbits_32(usb_base_addr + OTG_DCTL, OTG_DCTL_RWUSIG); + mmio_write_32(usb_base_addr + OTG_GINTSTS, OTG_GINTSTS_WKUPINT); + + return USB_RESUME; + } + + /* Handle suspend interrupt */ + if ((usb_dwc2_read_int(handle) & OTG_GINTSTS_USBSUSP) != 0U) { + INFO("handle USB : Suspend int\n"); + + mmio_write_32(usb_base_addr + OTG_GINTSTS, OTG_GINTSTS_USBSUSP); + + if ((mmio_read_32(usb_base_addr + OTG_DSTS) & + OTG_DSTS_SUSPSTS) == OTG_DSTS_SUSPSTS) { + return USB_SUSPEND; + } + } + + /* Handle LPM interrupt */ + if ((usb_dwc2_read_int(handle) & OTG_GINTSTS_LPMINT) != 0U) { + INFO("handle USB : LPM int enter in suspend\n"); + + mmio_write_32(usb_base_addr + OTG_GINTSTS, OTG_GINTSTS_LPMINT); + *param = (mmio_read_32(usb_base_addr + OTG_GLPMCFG) & + OTG_GLPMCFG_BESL) >> 2; + + return USB_LPM; + } + + /* Handle reset interrupt */ + if ((usb_dwc2_read_int(handle) & OTG_GINTSTS_USBRST) != 0U) { + INFO("handle USB : Reset\n"); + + mmio_clrbits_32(usb_base_addr + OTG_DCTL, OTG_DCTL_RWUSIG); + + usb_dwc2_flush_tx_fifo(handle, 0U); + + mmio_write_32(usb_base_addr + OTG_DAINT, OTG_DAINT_IN_MASK | OTG_DAINT_OUT_MASK); + mmio_setbits_32(usb_base_addr + OTG_DAINTMSK, OTG_DAINT_EP0_IN | OTG_DAINT_EP0_OUT); + + mmio_setbits_32(usb_base_addr + OTG_DOEPMSK, OTG_DOEPMSK_STUPM | + OTG_DOEPMSK_XFRCM | + OTG_DOEPMSK_EPDM); + mmio_setbits_32(usb_base_addr + OTG_DIEPMSK, OTG_DIEPMSK_TOM | + OTG_DIEPMSK_XFRCM | + OTG_DIEPMSK_EPDM); + + /* Set default address to 0 */ + mmio_clrbits_32(usb_base_addr + OTG_DCFG, OTG_DCFG_DAD); + + /* Setup EP0 to receive SETUP packets */ + ret = usb_dwc2_ep0_out_start(handle); + if (ret != USBD_OK) { + return ret; + } + + mmio_write_32(usb_base_addr + OTG_GINTSTS, OTG_GINTSTS_USBRST); + + return USB_RESET; + } + + /* Handle enumeration done interrupt */ + if ((usb_dwc2_read_int(handle) & OTG_GINTSTS_ENUMDNE) != 0U) { + ret = usb_dwc2_activate_setup(handle); + if (ret != USBD_OK) { + return ret; + } + + mmio_clrbits_32(usb_base_addr + OTG_GUSBCFG, OTG_GUSBCFG_TRDT); + + mmio_setbits_32(usb_base_addr + OTG_GUSBCFG, + (USBD_HS_TRDT_VALUE << OTG_GUSBCFG_TRDT_SHIFT) & OTG_GUSBCFG_TRDT); + + mmio_write_32(usb_base_addr + OTG_GINTSTS, OTG_GINTSTS_ENUMDNE); + + return USB_ENUM_DONE; + } + + /* Handle RXQLevel interrupt */ + if ((usb_dwc2_read_int(handle) & OTG_GINTSTS_RXFLVL) != 0U) { + mmio_clrbits_32(usb_base_addr + OTG_GINTMSK, + OTG_GINTSTS_RXFLVL); + + temp = mmio_read_32(usb_base_addr + OTG_GRXSTSP); + + *param = temp & OTG_GRXSTSP_EPNUM; + *param |= (temp & OTG_GRXSTSP_BCNT) << (USBD_OUT_COUNT_SHIFT - + OTG_GRXSTSP_BCNT_SHIFT); + + if (((temp & OTG_GRXSTSP_PKTSTS) >> OTG_GRXSTSP_PKTSTS_SHIFT) == STS_DATA_UPDT) { + if ((temp & OTG_GRXSTSP_BCNT) != 0U) { + mmio_setbits_32(usb_base_addr + OTG_GINTMSK, OTG_GINTSTS_RXFLVL); + + return USB_READ_DATA_PACKET; + } + } else if (((temp & OTG_GRXSTSP_PKTSTS) >> OTG_GRXSTSP_PKTSTS_SHIFT) == + STS_SETUP_UPDT) { + mmio_setbits_32(usb_base_addr + OTG_GINTMSK, OTG_GINTSTS_RXFLVL); + + return USB_READ_SETUP_PACKET; + } + + mmio_setbits_32(usb_base_addr + OTG_GINTMSK, OTG_GINTSTS_RXFLVL); + } + + /* Handle SOF interrupt */ + if ((usb_dwc2_read_int(handle) & OTG_GINTSTS_SOF) != 0U) { + INFO("handle USB : SOF\n"); + + mmio_write_32(usb_base_addr + OTG_GINTSTS, OTG_GINTSTS_SOF); + + return USB_SOF; + } + + /* Handle incomplete ISO IN interrupt */ + if ((usb_dwc2_read_int(handle) & OTG_GINTSTS_IISOIXFR) != 0U) { + INFO("handle USB : ISO IN\n"); + + mmio_write_32(usb_base_addr + OTG_GINTSTS, + OTG_GINTSTS_IISOIXFR); + } + + /* Handle incomplete ISO OUT interrupt */ + if ((usb_dwc2_read_int(handle) & OTG_GINTSTS_IPXFR_INCOMPISOOUT) != + 0U) { + INFO("handle USB : ISO OUT\n"); + + mmio_write_32(usb_base_addr + OTG_GINTSTS, + OTG_GINTSTS_IPXFR_INCOMPISOOUT); + } + + /* Handle connection event interrupt */ + if ((usb_dwc2_read_int(handle) & OTG_GINTSTS_SRQINT) != 0U) { + INFO("handle USB : Connect\n"); + + mmio_write_32(usb_base_addr + OTG_GINTSTS, OTG_GINTSTS_SRQINT); + } + + /* Handle disconnection event interrupt */ + if ((usb_dwc2_read_int(handle) & OTG_GINTSTS_OTGINT) != 0U) { + INFO("handle USB : Disconnect\n"); + + temp = mmio_read_32(usb_base_addr + OTG_GOTGINT); + + if ((temp & OTG_GOTGINT_SEDET) == OTG_GOTGINT_SEDET) { + return USB_DISCONNECT; + } + } + + return USB_NOTHING; +} + +/* + * Start the usb device mode + * usb_core_handle: USB core driver handle. + * return USB status. + */ +static enum usb_status usb_dwc2_start_device(void *handle) +{ + uintptr_t usb_base_addr = (uintptr_t)handle; + + mmio_clrbits_32(usb_base_addr + OTG_DCTL, OTG_DCTL_SDIS); + mmio_setbits_32(usb_base_addr + OTG_GAHBCFG, OTG_GAHBCFG_GINT); + + return USBD_OK; +} + +static const struct usb_driver usb_dwc2driver = { + .ep0_out_start = usb_dwc2_ep0_out_start, + .ep_start_xfer = usb_dwc2_ep_start_xfer, + .ep0_start_xfer = usb_dwc2_ep0_start_xfer, + .write_packet = usb_dwc2_write_packet, + .read_packet = usb_dwc2_read_packet, + .ep_set_stall = usb_dwc2_ep_set_stall, + .start_device = usb_dwc2_start_device, + .stop_device = usb_dwc2_stop_device, + .set_address = usb_dwc2_set_address, + .write_empty_tx_fifo = usb_dwc2_write_empty_tx_fifo, + .it_handler = usb_dwc2_it_handler +}; + +/* + * Initialize USB DWC2 driver. + * usb_core_handle: USB core driver handle. + * pcd_handle: PCD handle. + * base_register: USB global register base address. + */ +void stm32mp1_usb_init_driver(struct usb_handle *usb_core_handle, + struct pcd_handle *pcd_handle, + void *base_register) +{ + register_usb_driver(usb_core_handle, pcd_handle, &usb_dwc2driver, + base_register); +} |