diff options
author | Nikhil Devshatwar <nikhil.nd@ti.com> | 2017-10-03 14:39:21 +0530 |
---|---|---|
committer | David Huang <d-huang@ti.com> | 2017-11-14 09:22:09 -0500 |
commit | 502514f6f4dca261d185b866930f68812cc04e01 (patch) | |
tree | 4e1a241fc6d629ac135aae1c04ff05bc9f70625d | |
parent | 7a08cb14618dc50f39bda486d61721797df313b6 (diff) | |
download | omap-omapzoom-502514f6f4dca261d185b866930f68812cc04e01.tar.gz |
arm: dts: dra76-evm: Add JAMR support
Enable i2c4 and vin1a required for TVP5158 capture
Add device tree nodes which expose the base board devices
through the expansion board for JAMR board.
This includes video port, i2c bus and voltage regulators.
Change-Id: I6e286b3875eb0539cfa5db44d5d6772ddbcab518
Signed-off-by: Nikhil Devshatwar <nikhil.nd@ti.com>
-rw-r--r-- | arch/arm/boot/dts/dra76-evm.dts | 15 |
1 files changed, 15 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts index 95b3547b2634..c852a76ec21d 100644 --- a/arch/arm/boot/dts/dra76-evm.dts +++ b/arch/arm/boot/dts/dra76-evm.dts @@ -651,3 +651,18 @@ remote-endpoint = <&csi2_cam0>; }; }; + +video_in: &vin1a { + status = "okay"; +}; + +/* Expose generic DT labels for adapter board */ +video_in: &vin1a {}; +i2c_p3_exp: &i2c5 {}; +evm_3v3_sw: &vio_3v3 {}; + +#include "dra7xx-jamr3.dtsi" +&tvp_5158{ + mux-gpios = <&pcf_jamr3_21 8 GPIO_ACTIVE_LOW>; /*SEL_TVP_FPD*/ + /* No board muxes on baseboard */ +}; |