ARM: dts: msm: Correct min/max voltage and load current for kona platforms

Correct/Update min max voltages and load current for IO regulator.
This helps to provide expected current for the camera sensor for kona
platforms.

Change-Id: I18ec8b7d35c5ff990e2cb34848078cce355e1634

3 files changed, 111 insertions, 111 deletions

diff --git a/kona-camera-sensor-cdp.dtsi b/kona-camera-sensor-cdp.dtsi
index a81bb8f..00e3361 100644
--- a/kona-camera-sensor-cdp.dtsi
+++ b/kona-camera-sensor-cdp.dtsi
@@ -124,9 +124,9 @@
 		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
 			"cam_clk", "cam_vaf";
 		rgltr-cntrl-support;
-		rgltr-min-voltage = <0 2800000 1104000 0 2856000>;
-		rgltr-max-voltage = <0 3000000 1104000 0 3104000>;
-		rgltr-load-current = <0 80000 1200000 0 100000>;
+		rgltr-min-voltage = <1800000 2800000 1104000 0 2856000>;
+		rgltr-max-voltage = <1800000 3000000 1104000 0 3104000>;
+		rgltr-load-current = <120000 80000 1200000 0 100000>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk0_active
@@ -161,9 +161,9 @@
 		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
 			"cam_clk", "cam_vaf";
 		rgltr-cntrl-support;
-		rgltr-min-voltage = <0 2800000 1200000 0 2856000>;
-		rgltr-max-voltage = <0 3000000 1200000 0 3104000>;
-		rgltr-load-current = <0 80000 1200000 0 100000>;
+		rgltr-min-voltage = <1800000 2800000 1200000 0 2856000>;
+		rgltr-max-voltage = <1800000 3000000 1200000 0 3104000>;
+		rgltr-load-current = <120000 80000 1200000 0 100000>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk1_active
@@ -198,9 +198,9 @@
 		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
 			"cam_clk", "cam_vaf";
 		rgltr-cntrl-support;
-		rgltr-min-voltage = <0 2800000 1104000 0 2856000>;
-		rgltr-max-voltage = <0 3000000 1104000 0 3104000>;
-		rgltr-load-current = <0 80000 1200000 0 0>;
+		rgltr-min-voltage = <1800000 2800000 1104000 0 2856000>;
+		rgltr-max-voltage = <1800000 3000000 1104000 0 3104000>;
+		rgltr-load-current = <120000 80000 1200000 0 0>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk0_active
@@ -235,9 +235,9 @@
 		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
 			"cam_clk", "cam_vaf";
 		rgltr-cntrl-support;
-		rgltr-min-voltage = <0 2800000 1200000 0 2856000>;
-		rgltr-max-voltage = <0 3000000 1200000 0 3104000>;
-		rgltr-load-current = <0 80000 1200000 0 0>;
+		rgltr-min-voltage = <1800000 2800000 1200000 0 2856000>;
+		rgltr-max-voltage = <1800000 3000000 1200000 0 3104000>;
+		rgltr-load-current = <120000 80000 1200000 0 0>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk1_active
@@ -272,9 +272,9 @@
 		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
 			"cam_clk", "cam_vaf";
 		rgltr-cntrl-support;
-		rgltr-min-voltage = <0 2800000 1056000 0 2856000>;
-		rgltr-max-voltage = <0 3000000 1056000 0 3104000>;
-		rgltr-load-current = <0 80000 1200000 0 0>;
+		rgltr-min-voltage = <1800000 2800000 1056000 0 2856000>;
+		rgltr-max-voltage = <1800000 3000000 1056000 0 3104000>;
+		rgltr-load-current = <120000 80000 1200000 0 0>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk2_active
@@ -317,9 +317,9 @@
 			"cam_clk", "cam_bob";
 		rgltr-cntrl-support;
 		pwm-switch;
-		rgltr-min-voltage = <0 2800000 1104000 0 3008000>;
-		rgltr-max-voltage = <0 3000000 1104000 0 3960000>;
-		rgltr-load-current = <0 80000 1200000 0 2000000>;
+		rgltr-min-voltage = <1800000 2800000 1104000 0 3008000>;
+		rgltr-max-voltage = <1800000 3000000 1104000 0 3960000>;
+		rgltr-load-current = <120000 80000 1200000 0 2000000>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk0_active
@@ -360,9 +360,9 @@
 			"cam_clk", "cam_bob";
 		rgltr-cntrl-support;
 		pwm-switch;
-		rgltr-min-voltage = <0 2800000 1200000 0 3008000>;
-		rgltr-max-voltage = <0 3000000 1200000 0 3960000>;
-		rgltr-load-current = <0 80000 1200000 0 2000000>;
+		rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>;
+		rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>;
+		rgltr-load-current = <120000 80000 1200000 0 2000000>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk1_active
@@ -404,9 +404,9 @@
 			"cam_clk", "cam_bob";
 		rgltr-cntrl-support;
 		pwm-switch;
-		rgltr-min-voltage = <0 2800000 1104000 0 3008000>;
-		rgltr-max-voltage = <0 3000000 1104000 0 3960000>;
-		rgltr-load-current = <0 80000 1200000 0 2000000>;
+		rgltr-min-voltage = <1800000 2800000 1104000 0 3008000>;
+		rgltr-max-voltage = <1800000 3000000 1104000 0 3960000>;
+		rgltr-load-current = <120000 80000 1200000 0 2000000>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk0_active
@@ -448,9 +448,9 @@
 			"cam_clk", "cam_bob";
 		rgltr-cntrl-support;
 		pwm-switch;
-		rgltr-min-voltage = <0 2800000 1200000 0 3008000>;
-		rgltr-max-voltage = <0 3000000 1200000 0 3960000>;
-		rgltr-load-current = <0 80000 1200000 0 2000000>;
+		rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>;
+		rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>;
+		rgltr-load-current = <120000 80000 1200000 0 2000000>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk1_active
@@ -492,9 +492,9 @@
 			"cam_clk", "cam_bob";
 		rgltr-cntrl-support;
 		pwm-switch;
-		rgltr-min-voltage = <0 2800000 1056000 0 3008000>;
-		rgltr-max-voltage = <0 3000000 1056000 0 3960000>;
-		rgltr-load-current = <0 80000 1200000 0 2000000>;
+		rgltr-min-voltage = <1800000 2800000 1056000 0 3008000>;
+		rgltr-max-voltage = <1800000 3000000 1056000 0 3960000>;
+		rgltr-load-current = <120000 80000 1200000 0 2000000>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk2_active
@@ -573,9 +573,9 @@
 			"cam_clk", "cam_bob";
 		rgltr-cntrl-support;
 		pwm-switch;
-		rgltr-min-voltage = <0 2800000 1056000 0 3008000>;
-		rgltr-max-voltage = <0 3000000 1056000 0 3960000>;
-		rgltr-load-current = <0 80000 1200000 0 2000000>;
+		rgltr-min-voltage = <1800000 2800000 1056000 0 3008000>;
+		rgltr-max-voltage = <1800000 3000000 1056000 0 3960000>;
+		rgltr-load-current = <120000 80000 1200000 0 2000000>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk2_active
@@ -611,8 +611,8 @@
 		regulator-names = "cam_vio", "cam_vdig",
 			"cam_clk";
 		rgltr-cntrl-support;
-		rgltr-min-voltage = <0 3600000 0>;
-		rgltr-max-voltage = <0 3600000 0>;
+		rgltr-min-voltage = <1800000 3600000 0>;
+		rgltr-max-voltage = <1800000 3600000 0>;
 		rgltr-load-current = <180000 120000 0>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
diff --git a/kona-camera-sensor-mtp.dtsi b/kona-camera-sensor-mtp.dtsi
index 96d1ad5..a9bdbd5 100644
--- a/kona-camera-sensor-mtp.dtsi
+++ b/kona-camera-sensor-mtp.dtsi
@@ -110,9 +110,9 @@
 		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
 			"cam_clk", "cam_vaf";
 		rgltr-cntrl-support;
-		rgltr-min-voltage = <0 2800000 1104000 0 2856000>;
-		rgltr-max-voltage = <0 3000000 1104000 0 3104000>;
-		rgltr-load-current = <0 80000 1200000 0 100000>;
+		rgltr-min-voltage = <1800000 2800000 1104000 0 2856000>;
+		rgltr-max-voltage = <1800000 3000000 1104000 0 3104000>;
+		rgltr-load-current = <120000 80000 1200000 0 100000>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk0_active
@@ -147,9 +147,9 @@
 		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
 			"cam_clk", "cam_vaf";
 		rgltr-cntrl-support;
-		rgltr-min-voltage = <0 2800000 1200000 0 2856000>;
-		rgltr-max-voltage = <0 3000000 1200000 0 3104000>;
-		rgltr-load-current = <0 80000 1200000 0 100000>;
+		rgltr-min-voltage = <1800000 2800000 1200000 0 2856000>;
+		rgltr-max-voltage = <1800000 3000000 1200000 0 3104000>;
+		rgltr-load-current = <120000 80000 1200000 0 100000>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk1_active
@@ -184,9 +184,9 @@
 		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
 			"cam_clk", "cam_vaf";
 		rgltr-cntrl-support;
-		rgltr-min-voltage = <0 2800000 1104000 0 2856000>;
-		rgltr-max-voltage = <0 3000000 1104000 0 3104000>;
-		rgltr-load-current = <0 80000 1200000 0 0>;
+		rgltr-min-voltage = <1800000 2800000 1104000 0 2856000>;
+		rgltr-max-voltage = <1800000 3000000 1104000 0 3104000>;
+		rgltr-load-current = <120000 80000 1200000 0 0>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk0_active
@@ -221,9 +221,9 @@
 		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
 			"cam_clk", "cam_vaf";
 		rgltr-cntrl-support;
-		rgltr-min-voltage = <0 2800000 1200000 0 2856000>;
-		rgltr-max-voltage = <0 3000000 1200000 0 3104000>;
-		rgltr-load-current = <0 80000 1200000 0 0>;
+		rgltr-min-voltage = <1800000 2800000 1200000 0 2856000>;
+		rgltr-max-voltage = <1800000 3000000 1200000 0 3104000>;
+		rgltr-load-current = <120000 80000 1200000 0 0>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk1_active
@@ -266,9 +266,9 @@
 			"cam_clk", "cam_bob";
 		rgltr-cntrl-support;
 		pwm-switch;
-		rgltr-min-voltage = <0 2800000 1104000 0 3008000>;
-		rgltr-max-voltage = <0 3000000 1104000 0 3960000>;
-		rgltr-load-current = <0 80000 1200000 0 2000000>;
+		rgltr-min-voltage = <1800000 2800000 1104000 0 3008000>;
+		rgltr-max-voltage = <1800000 3000000 1104000 0 3960000>;
+		rgltr-load-current = <120000 80000 1200000 0 2000000>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk0_active
@@ -310,9 +310,9 @@
 			"cam_clk", "cam_bob";
 		rgltr-cntrl-support;
 		pwm-switch;
-		rgltr-min-voltage = <0 2800000 1200000 0 3008000>;
-		rgltr-max-voltage = <0 3000000 1200000 0 3960000>;
-		rgltr-load-current = <0 80000 1200000 0 2000000>;
+		rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>;
+		rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>;
+		rgltr-load-current = <120000 80000 1200000 0 2000000>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk1_active
@@ -354,9 +354,9 @@
 			"cam_clk", "cam_bob";
 		rgltr-cntrl-support;
 		pwm-switch;
-		rgltr-min-voltage = <0 2800000 1104000 0 3008000>;
-		rgltr-max-voltage = <0 3000000 1104000 0 3960000>;
-		rgltr-load-current = <0 80000 1200000 0 2000000>;
+		rgltr-min-voltage = <1800000 2800000 1104000 0 3008000>;
+		rgltr-max-voltage = <1800000 3000000 1104000 0 3960000>;
+		rgltr-load-current = <120000 80000 1200000 0 2000000>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk0_active
@@ -398,9 +398,9 @@
 			"cam_clk", "cam_bob";
 		rgltr-cntrl-support;
 		pwm-switch;
-		rgltr-min-voltage = <0 2800000 1200000 0 3008000>;
-		rgltr-max-voltage = <0 3000000 1200000 0 3960000>;
-		rgltr-load-current = <0 80000 1200000 0 2000000>;
+		rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>;
+		rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>;
+		rgltr-load-current = <120000 80000 1200000 0 2000000>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk1_active
@@ -448,9 +448,9 @@
 		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
 			"cam_clk", "cam_vaf";
 		rgltr-cntrl-support;
-		rgltr-min-voltage = <0 2800000 1056000 0 2856000>;
-		rgltr-max-voltage = <0 3000000 1056000 0 3104000>;
-		rgltr-load-current = <0 80000 1200000 0 100000>;
+		rgltr-min-voltage = <1800000 2800000 1056000 0 2856000>;
+		rgltr-max-voltage = <1800000 3000000 1056000 0 3104000>;
+		rgltr-load-current = <120000 80000 1200000 0 100000>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk2_active
@@ -485,9 +485,9 @@
 		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
 			"cam_clk", "cam_vaf";
 		rgltr-cntrl-support;
-		rgltr-min-voltage = <0 2800000 1056000 0 2856000>;
-		rgltr-max-voltage = <0 3000000 1056000 0 3104000>;
-		rgltr-load-current = <0 80000 1200000 0 100000>;
+		rgltr-min-voltage = <1800000 2800000 1056000 0 2856000>;
+		rgltr-max-voltage = <1800000 3000000 1056000 0 3104000>;
+		rgltr-load-current = <120000 80000 1200000 0 100000>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk2_active
@@ -528,9 +528,9 @@
 			"cam_clk", "cam_bob";
 		rgltr-cntrl-support;
 		pwm-switch;
-		rgltr-min-voltage = <0 2800000 1056000 0 3008000>;
-		rgltr-max-voltage = <0 3000000 1056000 0 3960000>;
-		rgltr-load-current = <0 80000 1200000 0 2000000>;
+		rgltr-min-voltage = <1800000 2800000 1056000 0 3008000>;
+		rgltr-max-voltage = <1800000 3000000 1056000 0 3960000>;
+		rgltr-load-current = <120000 80000 1200000 0 2000000>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk2_active
@@ -566,8 +566,8 @@
 		regulator-names = "cam_vio", "cam_vdig",
 			"cam_clk";
 		rgltr-cntrl-support;
-		rgltr-min-voltage = <0 3600000 0>;
-		rgltr-max-voltage = <0 3600000 0>;
+		rgltr-min-voltage = <1800000 3600000 0>;
+		rgltr-max-voltage = <1800000 3600000 0>;
 		rgltr-load-current = <180000 120000 0>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
@@ -610,9 +610,9 @@
 			"cam_clk", "cam_bob";
 		rgltr-cntrl-support;
 		pwm-switch;
-		rgltr-min-voltage = <0 2800000 1056000 0 3008000>;
-		rgltr-max-voltage = <0 3000000 1056000 0 3960000>;
-		rgltr-load-current = <0 80000 1200000 0 2000000>;
+		rgltr-min-voltage = <1800000 2800000 1056000 0 3008000>;
+		rgltr-max-voltage = <1800000 3000000 1056000 0 3960000>;
+		rgltr-load-current = <120000 80000 1200000 0 2000000>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk2_active
diff --git a/kona-camera-sensor-qrd.dtsi b/kona-camera-sensor-qrd.dtsi
index fb27366..30e7e44 100644
--- a/kona-camera-sensor-qrd.dtsi
+++ b/kona-camera-sensor-qrd.dtsi
@@ -122,9 +122,9 @@
 		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
 			"cam_clk", "cam_vaf";
 		rgltr-cntrl-support;
-		rgltr-min-voltage = <0 2800000 1104000 0 2856000>;
-		rgltr-max-voltage = <0 3000000 1104000 0 3104000>;
-		rgltr-load-current = <0 80000 1200000 0 100000>;
+		rgltr-min-voltage = <1800000 2800000 1104000 0 2856000>;
+		rgltr-max-voltage = <1800000 3000000 1104000 0 3104000>;
+		rgltr-load-current = <120000 80000 1200000 0 100000>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk0_active
@@ -159,9 +159,9 @@
 		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
 			"cam_clk", "cam_vaf";
 		rgltr-cntrl-support;
-		rgltr-min-voltage = <0 2800000 1200000 0 2856000>;
-		rgltr-max-voltage = <0 3000000 1200000 0 3104000>;
-		rgltr-load-current = <0 80000 1200000 0 100000>;
+		rgltr-min-voltage = <1800000 2800000 1200000 0 2856000>;
+		rgltr-max-voltage = <1800000 3000000 1200000 0 3104000>;
+		rgltr-load-current = <120000 80000 1200000 0 100000>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk1_active
@@ -196,9 +196,9 @@
 		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
 			"cam_clk", "cam_vaf";
 		rgltr-cntrl-support;
-		rgltr-min-voltage = <0 2800000 1104000 0 2856000>;
-		rgltr-max-voltage = <0 3000000 1104000 0 3104000>;
-		rgltr-load-current = <0 80000 1200000 0 0>;
+		rgltr-min-voltage = <1800000 2800000 1104000 0 2856000>;
+		rgltr-max-voltage = <1800000 3000000 1104000 0 3104000>;
+		rgltr-load-current = <120000 80000 1200000 0 0>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk0_active
@@ -233,9 +233,9 @@
 		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
 			"cam_clk", "cam_vaf";
 		rgltr-cntrl-support;
-		rgltr-min-voltage = <0 2800000 1200000 0 2856000>;
-		rgltr-max-voltage = <0 3000000 1200000 0 3104000>;
-		rgltr-load-current = <0 80000 1200000 0 0>;
+		rgltr-min-voltage = <1800000 2800000 1200000 0 2856000>;
+		rgltr-max-voltage = <1800000 3000000 1200000 0 3104000>;
+		rgltr-load-current = <120000 80000 1200000 0 0>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk1_active
@@ -270,9 +270,9 @@
 		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
 			"cam_clk", "cam_vaf";
 		rgltr-cntrl-support;
-		rgltr-min-voltage = <0 2800000 1056000 0 2856000>;
-		rgltr-max-voltage = <0 3000000 1056000 0 3104000>;
-		rgltr-load-current = <0 80000 1200000 0 0>;
+		rgltr-min-voltage = <1800000 2800000 1056000 0 2856000>;
+		rgltr-max-voltage = <1800000 3000000 1056000 0 3104000>;
+		rgltr-load-current = <120000 80000 1200000 0 0>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk2_active
@@ -315,9 +315,9 @@
 			"cam_clk", "cam_bob";
 		rgltr-cntrl-support;
 		pwm-switch;
-		rgltr-min-voltage = <0 2800000 1104000 0 3008000>;
-		rgltr-max-voltage = <0 3000000 1104000 0 3960000>;
-		rgltr-load-current = <0 80000 1200000 0 2000000>;
+		rgltr-min-voltage = <1800000 2800000 1104000 0 3008000>;
+		rgltr-max-voltage = <1800000 3000000 1104000 0 3960000>;
+		rgltr-load-current = <120000 80000 1200000 0 2000000>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk0_active
@@ -359,9 +359,9 @@
 			"cam_clk", "cam_bob";
 		rgltr-cntrl-support;
 		pwm-switch;
-		rgltr-min-voltage = <0 2800000 1200000 0 3008000>;
-		rgltr-max-voltage = <0 3000000 1200000 0 3960000>;
-		rgltr-load-current = <0 80000 1200000 0 2000000>;
+		rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>;
+		rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>;
+		rgltr-load-current = <120000 80000 1200000 0 2000000>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk1_active
@@ -403,9 +403,9 @@
 			"cam_clk", "cam_bob";
 		rgltr-cntrl-support;
 		pwm-switch;
-		rgltr-min-voltage = <0 2800000 1104000 0 3008000>;
-		rgltr-max-voltage = <0 3000000 1104000 0 3960000>;
-		rgltr-load-current = <0 80000 1200000 0 2000000>;
+		rgltr-min-voltage = <1800000 2800000 1104000 0 3008000>;
+		rgltr-max-voltage = <1800000 3000000 1104000 0 3960000>;
+		rgltr-load-current = <120000 80000 1200000 0 2000000>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk0_active
@@ -447,9 +447,9 @@
 			"cam_clk", "cam_bob";
 		rgltr-cntrl-support;
 		pwm-switch;
-		rgltr-min-voltage = <0 2800000 1200000 0 3008000>;
-		rgltr-max-voltage = <0 3000000 1200000 0 3960000>;
-		rgltr-load-current = <0 80000 1200000 0 2000000>;
+		rgltr-min-voltage = <1800000 2800000 1200000 0 3008000>;
+		rgltr-max-voltage = <1800000 3000000 1200000 0 3960000>;
+		rgltr-load-current = <120000 80000 1200000 0 2000000>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk1_active
@@ -491,9 +491,9 @@
 			"cam_clk", "cam_bob";
 		rgltr-cntrl-support;
 		pwm-switch;
-		rgltr-min-voltage = <0 2800000 1056000 0 3008000>;
-		rgltr-max-voltage = <0 3000000 1056000 0 3960000>;
-		rgltr-load-current = <0 80000 1200000 0 2000000>;
+		rgltr-min-voltage = <1800000 2800000 1056000 0 3008000>;
+		rgltr-max-voltage = <1800000 3000000 1056000 0 3960000>;
+		rgltr-load-current = <120000 80000 1200000 0 2000000>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk2_active
@@ -529,9 +529,9 @@
 		regulator-names = "cam_vio", "cam_vana", "cam_vdig",
 			"cam_clk", "cam_vaf";
 		rgltr-cntrl-support;
-		rgltr-min-voltage = <0 2800000 1056000 0 2856000>;
-		rgltr-max-voltage = <0 3000000 1056000 0 3104000>;
-		rgltr-load-current = <0 80000 1200000 0 100000>;
+		rgltr-min-voltage = <1800000 2800000 1056000 0 2856000>;
+		rgltr-max-voltage = <1800000 3000000 1056000 0 3104000>;
+		rgltr-load-current = <120000 80000 1200000 0 100000>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk2_active
@@ -572,9 +572,9 @@
 			"cam_clk", "cam_bob";
 		rgltr-cntrl-support;
 		pwm-switch;
-		rgltr-min-voltage = <0 2800000 1056000 0 3008000>;
-		rgltr-max-voltage = <0 3000000 1056000 0 3960000>;
-		rgltr-load-current = <0 80000 1200000 0 2000000>;
+		rgltr-min-voltage = <1800000 2800000 1056000 0 3008000>;
+		rgltr-max-voltage = <1800000 3000000 1056000 0 3960000>;
+		rgltr-load-current = <120000 80000 1200000 0 2000000>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";
 		pinctrl-0 = <&cam_sensor_mclk2_active
@@ -610,8 +610,8 @@
 		regulator-names = "cam_vio", "cam_vdig",
 			"cam_clk";
 		rgltr-cntrl-support;
-		rgltr-min-voltage = <0 3600000 0>;
-		rgltr-max-voltage = <0 3600000 0>;
+		rgltr-min-voltage = <1800000 3600000 0>;
+		rgltr-max-voltage = <1800000 3600000 0>;
 		rgltr-load-current = <180000 120000 0>;
 		gpio-no-mux = <0>;
 		pinctrl-names = "cam_default", "cam_suspend";